《音场环境测试软件》(Rational Acoustics Smaart)更新v7.2.1.1/含注册机[压缩包]
![《音场环境测试软件》(Rational Acoustics Smaart)更新v7.2.1.1/含注册机[压缩包]](/Uploads/26/268/268588.jpg)
电驴资源
| 用户共享的电驴资源列表 | |
|---|---|
| [声音系统管理、测量和控制软件].Loud.Technologies.EAW.Smaart.v6.1-UNION.zip | 10.10 MB |
| 10.10 MB | |
电驴资源简介
简介:
/thumb.jpg)
软件类型：软件 多媒体类
软件性质：破解软件
操作系统：Windows
应用平台：Windows 2000, XP (or higher)
问题反馈： http://www.eaw.com/support/
网站链接： http://www.eaw.com/products/software/EAWSmaart/
软件介绍：
引用Recommended Computer Requirements
* Windows: OS: Windows 2000, XP (or higher)
* CPU: 1 GHz or faster Intel Pentium or compatible
* RAM: 512 MB to 1 GB or more
* Display: minimum 1024 x 768 pixels with 16 bit color
* Audio Hardware: Windows-compatible (Wave/WDM or ASIO) with stereo line level input, 16-bit/44100 to 24-bit/96000 sampling with full-duplex (simultaneous play and record) capability
SIA-Smaart Pro是设计给音响工程师，建声电声顾问等专业人仕的一件价廉物美的测试仪器。现在没有必要用昂贵的价钱去购买一台专用的测试仪器。只要有一套完美的软件，加上市面上随手可买到的手提电脑，其功能和准确性远胜一件价格昂贵的专用测试仪器。
Smaart Pro的基本功能有实时频谱分析仪。可以同时存储两组信号进行比较，对于系统调校至为方便。
在SIA-Smaart Pro的Real-Time Module实时模块上，将功能扩展，实时显示相位和Fixed Point Per Octave（FPPO）固定点倍频程传递函数。FPPO可以在整个音频频谱上提供同等的频率分辨率，更容易地观察信号，让分析工作更容易更准确。
Real-Time Module实时模块内的Delay Locator延时装置器，懂得自动计算延时时间，然后自动设定延时值。而且容许储存、显示、比较多组的记录。例如将一个音源信号经过音响系统，然后由扬声器发出，将接收回来的信号和音源信号作比较，分析电信号和声信号的差异。
SIA-Smaart Pro的功能非常强大，假若要购买一台相当功能和精度的专用仪器，价格肯定不菲。现在只要你拥有一台手提电脑。加上一套软件，一切都解决了。
可以通过左右两个通道在电脑中进行对比、转换、分析只要两个通道的连路接入到不同点，就可以方便的分析问题的所在，同时再通过本身控制模块调节外部设备，可以调试出最专业的声场。
从6.0开始支持ASIO驱动了，可以自由选择不同的声卡硬件输入口给软件的两个输入通道，输出也一样。还有双视口自由切换RTA、传递函数、相位视图.
Retail: 872$
Smaart v.6 performs dual-channel, FFT-based audio measurement in an intuitive, accessible interface that seamlessly integrates measurement, analysis, and data logging. It can also remotely control an extensive, constantly expanding list of professional equalizers and DSP processors.
Rebuilt from the ground up, Smaart v.6 features significantly modernized architecture to unleash the potential of the latest microprocessors and multitasking operating systems.
Further, Smaart v.6 now runs native under both Mac OS X and Windows from the same unified source code. While the Windows platform has been the dominant platform for pro audio system engineering for the past decade, the OS X platform has always retained significant penetration and is rapidly becoming the preferred platform throughout the professional audio market.
Smaart v.6 also features a new, streamlined interface that enables users to tap the power of the new software architecture while preserving the renowned usability of previous Smaart versions – developed from over decade of input from the largest (and still rapidly growing!) user base in the industry.
Support for ASIO Multi-Channel Input Devices
Smaart v.6 can receive multi-channel inputs via ASIO under Windows or Core Audio on Mac OS X, enabling selection of measurement signals from a multi-channel device within Smaart. This new data acquisition module opens up a vast array of multi-channel audio devices now available on the market, such as the Mackie Onyx 800F FireWire preamp. It also greatly simplifies the hardware setup requirements for operating a multi-microphone Smaart measurement rig.
New Real-Time Measurement Mode
All Smaart real-time measurements (RTA, Spectrograph, Transfer Function (magnitude and phase), and Impulse Response now run concurrently, and any two measurements can be viewed simultaneously. The result is the ability to run hybrid measurement modes that display real-time Spectrum and Frequency Response data at the same time. This platform allows operators to significantly expand the way they measure and address their sound systems.
* Two-Channel RTA: Selectable linear or fractional octave banding (down to 1/24th octave resolution), peak-hold, THD calculation, user-defined timed averaging, and standard Noise Criterion curves (when calibrated for SPL measurement).
* Single-Channel Spectrograph: 3-D display of a signal’s spectral content over time helps identify feedback frequencies, system resonances, and mechanical noise.
* Frequency Response Magnitude Coherence: Measurements down to 1/24th octave resolution of system magnitude response with comprehensive rms and vector averaging functionality and a corresponding Coherence measurement indicating data quality/stability.
* Phase Response: Measurements down to 1/24th octave resolution of system phase response.
Enhanced Impulse Response Mode
Impulse Response Mode now operates in its own window that runs independently of real-time Spectrum and Transfer Function measurements. The Impulse Response Mode has also been expanded to include intuitive tools for analyzing and dissecting IR measurements on the fly, such as a user-specified time window function for retrieving frequency domain data from specific portions of an impulse response.
Expanded Signal Generator Functionality
Smaart v.6 adds triggered swept sine waves for impulse response measurements to its standard list of generator signals and functions. The triggered swept sine functionality operates with the FFT length-specific, synchronized measurement sources, and enables the user to do traditional laboratory and QC measurements.
Increased Data Storage and Display Capacity
Smaart v.6 has dramatically increased capability for storing, recalling, and displaying a virtually unlimited number of reference data traces such as Frequency Response and RTA. Moreover, all captured measurements are now stored directly to the hard drive to prevent accidental loss due to power failures or other interruptions. Advanced trace averaging capabilities have also been added.
Object-Oriented, Multi-Threaded Program Architecture
Multiple sessions of Smaart can now run simultaneously, allowing for the integration of multiple simultaneous system measurements in later releases. A new API (Application Programming Interface) allows other software programs – even third party programs such as Dolby Lake - to import Smaart data and control the Smaart measurement engines remotely. And, with code base portability, Smaart’s measurement engines are now separate code “objects” that can be integrated into other EAW/LOUD Technologies products such as the SPL meter on the new EAW UMX.96 digital mixing console.
代码
²
± °² ² ² ²
° ² ²
° ± °°°°° ²° ²° ²² °°°°°° ²°
² ° ²°
± ² ²
² ² ²
² PRESENTS
ON
Loud Technologies EAW Smaart v6.1 04/21/10
Cracker Claro Supplier UNION ²
Packager UNION OS XP/Vista ° ²
Protection License °
° Retail 872$
²
² ² ²±
°² NOTES °²
http //www.eaw.com
²
²
°
²
±
We don't want sites, neither couriers and we don't take in new
crackers. If we feel you are worthy you will be contacted.
Greetings goes to CLS.CORE.DSI.HBD.LND.OGN.PDM
RZR.REBELS.X-FORCE.UCL.UCF
°
UNION! ²° ²
²
.nfo header and layout by Hetero
[安全检测]
★未经过安全检测
[安装测试]
★未经过安装测试，使用者后果自负与本论坛无关。
[免责声明]
★本帖介绍的文本内容转自网络，如有出入则以官方站点公布之信息为准，凡摘自网络相关图文介绍内容的本帖不另行标注出处，原创作者如有异议可提出以便删除。
★关于软件破解及注册机可能被杀毒软件报病毒或间谍木马（若已检测到的则将在帖中特别标注），请自行甄别和取舍，不另行加以解释。
★资源下载后请对文件做必要的安全检测，该下载内容仅限于个人测试学习之用，不得用于商业用途，并且请在下载后24小时内删除。
★各计算机系统环境各不相同，因此不保证该软件完全兼容于你的计算机系统，最终解决软件安装运行问题请联络官方站点寻求相关技术支持。
★凡标注为下载链接转自其他站点的，无法保证资源的供源以及资源本身等情况的完整性和可用性（不可控）。
★资源版权归作者及其公司所有，如果你喜欢，请购买正版。
软件类型：软件 多媒体类
软件性质：破解软件
操作系统：Windows
应用平台：Windows 2000, XP (or higher)
问题反馈： http://www.eaw.com/support/
网站链接： http://www.eaw.com/products/software/EAWSmaart/
软件介绍：
引用Recommended Computer Requirements
* Windows: OS: Windows 2000, XP (or higher)
* CPU: 1 GHz or faster Intel Pentium or compatible
* RAM: 512 MB to 1 GB or more
* Display: minimum 1024 x 768 pixels with 16 bit color
* Audio Hardware: Windows-compatible (Wave/WDM or ASIO) with stereo line level input, 16-bit/44100 to 24-bit/96000 sampling with full-duplex (simultaneous play and record) capability
SIA-Smaart Pro是设计给音响工程师，建声电声顾问等专业人仕的一件价廉物美的测试仪器。现在没有必要用昂贵的价钱去购买一台专用的测试仪器。只要有一套完美的软件，加上市面上随手可买到的手提电脑，其功能和准确性远胜一件价格昂贵的专用测试仪器。
Smaart Pro的基本功能有实时频谱分析仪。可以同时存储两组信号进行比较，对于系统调校至为方便。
在SIA-Smaart Pro的Real-Time Module实时模块上，将功能扩展，实时显示相位和Fixed Point Per Octave（FPPO）固定点倍频程传递函数。FPPO可以在整个音频频谱上提供同等的频率分辨率，更容易地观察信号，让分析工作更容易更准确。
Real-Time Module实时模块内的Delay Locator延时装置器，懂得自动计算延时时间，然后自动设定延时值。而且容许储存、显示、比较多组的记录。例如将一个音源信号经过音响系统，然后由扬声器发出，将接收回来的信号和音源信号作比较，分析电信号和声信号的差异。
SIA-Smaart Pro的功能非常强大，假若要购买一台相当功能和精度的专用仪器，价格肯定不菲。现在只要你拥有一台手提电脑。加上一套软件，一切都解决了。
可以通过左右两个通道在电脑中进行对比、转换、分析只要两个通道的连路接入到不同点，就可以方便的分析问题的所在，同时再通过本身控制模块调节外部设备，可以调试出最专业的声场。
从6.0开始支持ASIO驱动了，可以自由选择不同的声卡硬件输入口给软件的两个输入通道，输出也一样。还有双视口自由切换RTA、传递函数、相位视图.
Retail: 872$
Smaart v.6 performs dual-channel, FFT-based audio measurement in an intuitive, accessible interface that seamlessly integrates measurement, analysis, and data logging. It can also remotely control an extensive, constantly expanding list of professional equalizers and DSP processors.
Rebuilt from the ground up, Smaart v.6 features significantly modernized architecture to unleash the potential of the latest microprocessors and multitasking operating systems.
Further, Smaart v.6 now runs native under both Mac OS X and Windows from the same unified source code. While the Windows platform has been the dominant platform for pro audio system engineering for the past decade, the OS X platform has always retained significant penetration and is rapidly becoming the preferred platform throughout the professional audio market.
Smaart v.6 also features a new, streamlined interface that enables users to tap the power of the new software architecture while preserving the renowned usability of previous Smaart versions – developed from over decade of input from the largest (and still rapidly growing!) user base in the industry.
Support for ASIO Multi-Channel Input Devices
Smaart v.6 can receive multi-channel inputs via ASIO under Windows or Core Audio on Mac OS X, enabling selection of measurement signals from a multi-channel device within Smaart. This new data acquisition module opens up a vast array of multi-channel audio devices now available on the market, such as the Mackie Onyx 800F FireWire preamp. It also greatly simplifies the hardware setup requirements for operating a multi-microphone Smaart measurement rig.
New Real-Time Measurement Mode
All Smaart real-time measurements (RTA, Spectrograph, Transfer Function (magnitude and phase), and Impulse Response now run concurrently, and any two measurements can be viewed simultaneously. The result is the ability to run hybrid measurement modes that display real-time Spectrum and Frequency Response data at the same time. This platform allows operators to significantly expand the way they measure and address their sound systems.
* Two-Channel RTA: Selectable linear or fractional octave banding (down to 1/24th octave resolution), peak-hold, THD calculation, user-defined timed averaging, and standard Noise Criterion curves (when calibrated for SPL measurement).
* Single-Channel Spectrograph: 3-D display of a signal’s spectral content over time helps identify feedback frequencies, system resonances, and mechanical noise.
* Frequency Response Magnitude Coherence: Measurements down to 1/24th octave resolution of system magnitude response with comprehensive rms and vector averaging functionality and a corresponding Coherence measurement indicating data quality/stability.
* Phase Response: Measurements down to 1/24th octave resolution of system phase response.
Enhanced Impulse Response Mode
Impulse Response Mode now operates in its own window that runs independently of real-time Spectrum and Transfer Function measurements. The Impulse Response Mode has also been expanded to include intuitive tools for analyzing and dissecting IR measurements on the fly, such as a user-specified time window function for retrieving frequency domain data from specific portions of an impulse response.
Expanded Signal Generator Functionality
Smaart v.6 adds triggered swept sine waves for impulse response measurements to its standard list of generator signals and functions. The triggered swept sine functionality operates with the FFT length-specific, synchronized measurement sources, and enables the user to do traditional laboratory and QC measurements.
Increased Data Storage and Display Capacity
Smaart v.6 has dramatically increased capability for storing, recalling, and displaying a virtually unlimited number of reference data traces such as Frequency Response and RTA. Moreover, all captured measurements are now stored directly to the hard drive to prevent accidental loss due to power failures or other interruptions. Advanced trace averaging capabilities have also been added.
Object-Oriented, Multi-Threaded Program Architecture
Multiple sessions of Smaart can now run simultaneously, allowing for the integration of multiple simultaneous system measurements in later releases. A new API (Application Programming Interface) allows other software programs – even third party programs such as Dolby Lake - to import Smaart data and control the Smaart measurement engines remotely. And, with code base portability, Smaart’s measurement engines are now separate code “objects” that can be integrated into other EAW/LOUD Technologies products such as the SPL meter on the new EAW UMX.96 digital mixing console.
代码
²
± °² ² ² ²
° ² ²
° ± °°°°° ²° ²° ²² °°°°°° ²°
² ° ²°
± ² ²
² ² ²
² PRESENTS
ON
Loud Technologies EAW Smaart v6.1 04/21/10
Cracker Claro Supplier UNION ²
Packager UNION OS XP/Vista ° ²
Protection License °
° Retail 872$
²
² ² ²±
°² NOTES °²
http //www.eaw.com
²
²
°
²
±
We don't want sites, neither couriers and we don't take in new
crackers. If we feel you are worthy you will be contacted.
Greetings goes to CLS.CORE.DSI.HBD.LND.OGN.PDM
RZR.REBELS.X-FORCE.UCL.UCF
°
UNION! ²° ²
²
.nfo header and layout by Hetero
[安全检测]
★未经过安全检测
[安装测试]
★未经过安装测试，使用者后果自负与本论坛无关。
[免责声明]
★本帖介绍的文本内容转自网络，如有出入则以官方站点公布之信息为准，凡摘自网络相关图文介绍内容的本帖不另行标注出处，原创作者如有异议可提出以便删除。
★关于软件破解及注册机可能被杀毒软件报病毒或间谍木马（若已检测到的则将在帖中特别标注），请自行甄别和取舍，不另行加以解释。
★资源下载后请对文件做必要的安全检测，该下载内容仅限于个人测试学习之用，不得用于商业用途，并且请在下载后24小时内删除。
★各计算机系统环境各不相同，因此不保证该软件完全兼容于你的计算机系统，最终解决软件安装运行问题请联络官方站点寻求相关技术支持。
★凡标注为下载链接转自其他站点的，无法保证资源的供源以及资源本身等情况的完整性和可用性（不可控）。
★资源版权归作者及其公司所有，如果你喜欢，请购买正版。